|
|
|
|
 |  |  |
 |
 |  |
 |
Seller Information |
 |
|
 |
| Metalcraftusa member since 24-sep-2008 |
| | Rochester, Minnesota, USA | Phone:(507) 289-0836 |
|
Please only contact the seller if you are interested in buying or bartering for this item. Spam and fraud will not be tolerated. No sign in is required. |
|
| View seller's other items |
|
|
 |
|
|
 |  |
 |  |  |
 |
|
|
 |  |  |
 |
 |  |
 |
Classified Details |
 |
|
 |
| Picture shows scrolls made with the MK1/2 Scroll Bender. Scrolls made using 1/2"w x 3/32" thickness flat strip, 3/8"w x 1/16" thickness flat strip, and 1/8" round rod. (scrolls not included with tool).
MK1/2 SCROLL BENDER SPECIFICATIONS:
Maximum working capacity:
1/2" x 3/32" (flat metal strip)
1/8" (solid round rod)
Max. scroll size
3" - the maximum scroll size quoted is approximate due to the varying temper (spring) of steel.
Dimensions
4"w x 4"d x 1 3/4"h.
EASY TO USE - NO PRE-HEATING OF METAL REQUIRED WHEN SCROLLING
- On the MK1/2 Scroll Bender, the end of the metal strip is placed between two central rollers and is gripped by adjusting the movable roller. On the MK2/2, the metal is placed in the slot of the center pillar. For both scroll benders, the metal strip is then drawn around center segment to produce initial part of scroll.
- Depending on size of scroll required, metal strip is drawn around further with 2nd segment placed in position). For consistency when producing repeated scrolls, mark on base where metal leaves the segment.
- Finally release finished scroll (scroll comes out flat).
All tools are supplied with operating instructions. Please note that the maximum working capacity stated is for Hot Rolled Material or Annealed metal. Working beyond these limits or with material of greater hardness may reduce the operational life of the tool.
The MK1/2 Scroll Bender is shipped in 1 box: approx. 2 lbs.
availability: In stock and usually ships next business day.
_____________________________
Wrought Iron Handicrafts, Inc.
3950 10th Ave NW
Rochester MN 55901
800-456-7738
metalcraftusa com |
|
|
|
 |
|
|
 |  |
 |  |  |
 |
|
|
|
|
|